Macchine da perforazione geotecnica
General Details
Macchine da perforazione cingolate progettate per ricerche geotecniche, sondaggi esplorativi e pozzi. La loro compattezza e la rilevante potenza, permettono operatività comparabili a macchine di maggiori dimensioni e costi.
Scheda tecnica 30 GEO
| MODELLO | JC-30-Geo | ||
| CARRO CINGOLATO / UNDERCARRIAGE | |||
| Passo / Wheelbase | mm | 1100 | |
| Lunghezza / Lenght | mm | 1440 | |
| Larghezza / Width | mm | 1000 | |
| Larghezza suole / Pad width | mm | 250 | |
| Velocità max. / Max speed | km / h | 2,2 | |
| Max variazione di pendenza (%) / Max slope (%) | gradi / degrees | 17° (31) | |
| CENTRALINA / POWER PACK | |||
| Potenza motore max / Engine power max | kW (Hp) @ rpm | 44(62) @ 2300 | |
| Livello pressione acustica a m. 3 / Acoustic pressure at operator station at 3 m. | dB (A) | 75 | |
| Capacità serbatoio olio / Oil tank capacity | lt. | 100 | |
| Serbatoio gasolio / Fuel tank capacity | lt. | 65 | |
| ANTENNA / MAST | |||
| Corsa utile antenna base / Feed stroke with basic mast | mm | 1770 | |
| Altezza min. con antenna base / Minimum height with basic mast | mm | 2600 | |
| Traslazione / Longitudinal translation | mm | 315 | |
| Forza spinta / Feed force | daN | 2800 | |
| Forza tiro / Pullback force | daN | 4200 | |
| TESTA DI ROTAZIONE / ROTARY HEAD | |||
| Marce / Gears | n° | 2 | |
| Coppia max. / Max torque | Nm | 3500 | |
| Giri max / Max speed | rpm | 0-120 | |
| Filetto cannotto / Stub shaft | in. | 2 3/8″ A.P.I. Reg. | |
| MORSA – SVITATORE / CLAMP SET | |||
| Diametro di serrraggio (min-max) / Operation range | mm | 50-200 | |
| Forza di chiusura / Clamping force | daN | 15000 | |
| Coppia di svitaggio/ Breakout torque | daN | 2800 | |
| ARGANO/ HYDRAULIC WINCH | |||
| Tiro max / Pulling force | daN | 700 | |
| Capacità fune / Drum capacity | m | 45 | |
| DIMENSIONI TRASPORTO PERFORATRICE / DRILL RIG TRANSPORT DIMENSIONS | |||
| Lunghezza / Lenght | mm | 2800 | |
| Larghezza / Width | mm | 1000 | |
| Altezza / Height | mm | 1780 | |
| Peso / Weight | kg | 2600 | |
Scheda tecnica 60 GEO
| MODELLO | JC-60-Geo | ||
| CARRO CINGOLATO / UNDERCARRIAGE | |||
| Passo / Wheelbase | mm | 1400 | |
| Lunghezza / Lenght | mm | 1830 | |
| Larghezza / Width | mm | 1300 | |
| Larghezza suole / Pad width | mm | 250 | |
| Velocità max. / Max speed | km / h | 1,8 | |
| Max variazione di pendenza (%) / Max slope (%) | gradi / degrees | 17° (31) | |
| CENTRALINA / POWER PACK | |||
| Potenza motore max / Engine power max | kW (Hp) @ rpm | 62 (85) @ 2300 | |
| Livello pressione acustica a m. 3 / Acoustic pressure at operator station at 3 m. | dB (A) | 75 | |
| Capacità serbatoio olio / Oil tank capacity | lt. | 145 | |
| Serbatoio gasolio / Fuel tank capacity | lt. | 80 | |
| ANTENNA / MAST | |||
| Corsa utile antenna base / Feed stroke with basic mast | mm | 2100 | |
| Altezza min. con antenna base / Minimum height with basic mast | mm | 3235 | |
| Traslazione / Longitudinal translation | mm | 315 | |
| Forza spinta / Feed force | daN | 4000 | |
| Forza tiro / Pullback force | daN | 5500 | |
| TESTA DI ROTAZIONE / ROTARY HEAD | |||
| Marce / Gears | n° | 2 | |
| Coppia max. / Max torque | Nm | 5600 | |
| Giri max / Max speed | rpm | 0-180 | |
| Filetto cannotto / Stub shaft | in. | 2 3/8″ A.P.I. Reg. | |
| MORSA – SVITATORE / CLAMP SET | |||
| Diametro di serrraggio (min-max) / Operation range | mm | 50-200 | |
| Forza di chiusura / Clamping force | daN | 15000 | |
| Coppia di svitaggio/ Breakout torque | daN | 2800 | |
| ARGANO/ HYDRAULIC WINCH | |||
| Tiro max / Pulling force | daN | 800 | |
| Capacità fune / Drum capacity | m | 45 | |
| DIMENSIONI TRASPORTO PERFORATRICE / DRILL RIG TRANSPORT DIMENSIONS | |||
| Lunghezza / Lenght | mm | 3250 | |
| Larghezza / Width | mm | 1300 | |
| Altezza / Height | mm | 1780 | |
| Peso / Weight | kg | 3830 | |
Scheda tecnica 61 GEO
| MODELLO | JC-61-Geo | ||
| CARRO CINGOLATO / UNDERCARRIAGE | |||
| Passo / Wheelbase | mm | 1530 | |
| Lunghezza / Lenght | mm | 1960 | |
| Larghezza / Width | mm | 1300 | |
| Larghezza suole / Pad width | mm | 250 | |
| Velocità max. / Max speed | km / h | 1,8 | |
| Max variazione di pendenza (%) / Max slope (%) | gradi / degrees | 17° (31) | |
| CENTRALINA / POWER PACK | |||
| Potenza motore max / Engine power max | kW (Hp) @ rpm | 62 (85) @ 2300 | |
| Livello pressione acustica a m. 3 / Acoustic pressure at operator station at 3 m. | dB (A) | 75 | |
| Capacità serbatoio olio / Oil tank capacity | lt. | 145 | |
| Serbatoio gasolio / Fuel tank capacity | lt. | 80 | |
| ANTENNA / MAST | |||
| Corsa utile antenna base / Feed stroke with basic mast | mm | 3300 | |
| Altezza min. con antenna base / Minimum height with basic mast | mm | 4300 | |
| Traslazione / Longitudinal translation | mm | 315 | |
| Forza spinta / Feed force | daN | 4000 | |
| Forza tiro / Pullback force | daN | 5500 | |
| TESTA DI ROTAZIONE / ROTARY HEAD | |||
| Marce / Gears | n° | 6 | |
| Coppia max. / Max torque | Nm | 7500 | |
| Giri max / Max speed | rpm | 0-340 | |
| Filetto cannotto / Stub shaft | in. | 2 3/8″ A.P.I. Reg. | |
| MORSA – SVITATORE / CLAMP SET | |||
| Diametro di serrraggio (min-max) / Operation range | mm | 50-250 | |
| Forza di chiusura / Clamping force | daN | 18000 | |
| Coppia di svitaggio/ Breakout torque | daN | 3200 | |
| ARGANO/ HYDRAULIC WINCH | |||
| Tiro max / Pulling force | daN | 800 | |
| Capacità fune / Drum capacity | m | 45 | |
| DIMENSIONI TRASPORTO PERFORATRICE / DRILL RIG TRANSPORT DIMENSIONS | |||
| Lunghezza / Lenght | mm | 4300 | |
| Larghezza / Width | mm | 1300 | |
| Altezza / Height | mm | 1780 | |
| Peso / Weight | kg | 4200 | |
Scheda tecnica 80 GEO
| MODELLO | JC-80-Geo | ||
| CARRO CINGOLATO / UNDERCARRIAGE | |||
| Passo / Wheelbase | mm | 1940 | |
| Lunghezza / Lenght | mm | 2475 | |
| Larghezza / Width | mm | 1700 | |
| Larghezza suole / Pad width | mm | 400 | |
| Velocità max. / Max speed | km / h | 1,8 | |
| Max variazione di pendenza (%) / Max slope (%) | gradi / degrees | 17° (31) | |
| CENTRALINA / POWER PACK | |||
| Potenza motore max / Engine power max | kW (Hp) @ rpm | 92 (129) @ 2600 | |
| Livello pressione acustica a m. 3 / Acoustic pressure at operator station at 3 m. | dB (A) | 75 | |
| Capacità serbatoio olio / Oil tank capacity | lt. | 230 | |
| Serbatoio gasolio / Fuel tank capacity | lt. | 90 | |
| ANTENNA / MAST | |||
| Corsa utile antenna base / Feed stroke with basic mast | mm | 3500 | |
| Altezza min. con antenna base / Minimum height with basic mast | mm | 5950 | |
| Traslazione / Longitudinal translation | mm | 430 | |
| Forza spinta / Feed force | daN | 6000 | |
| Forza tiro / Pullback force | daN | 7200 | |
| TESTA DI ROTAZIONE / ROTARY HEAD | |||
| Marce / Gears | n° | 6 | |
| Coppia max. / Max torque | Nm | 9200 | |
| Giri max / Max speed | rpm | 0-490 | |
| Filetto cannotto / Stub shaft | in. | 2 3/8″ A.P.I. Reg. | |
| MORSA – SVITATORE / CLAMP SET | |||
| Diametro di serrraggio (min-max) / Operation range | mm | 50-300 | |
| Forza di chiusura / Clamping force | daN | 25000 | |
| Coppia di svitaggio/ Breakout torque | daN | 4650 | |
| ARGANO/ HYDRAULIC WINCH | |||
| Tiro max / Pulling force | daN | 1300 | |
| Capacità fune / Drum capacity | m | 45 | |
| DIMENSIONI TRASPORTO PERFORATRICE / DRILL RIG TRANSPORT DIMENSIONS | |||
| Lunghezza / Lenght | mm | 5950 | |
| Larghezza / Width | mm | 1700 | |
| Altezza / Height | mm | 2100 | |
| Peso / Weight | kg | 8600 | |




